COMMERCIAL DRONE CLEANING · DENVER, COLORADO

Stadiums. Hospitals. Towers. Cleaned from the air.

We fly tethered drones with heated, purified water on a site-specific safety plan. Windows, facades, solar panels and roofs, from Fort Collins to Colorado Springs.

Flown and logged: Empower Field at Mile HighDenver Performing Arts ComplexUCHealth Memorial Hospital Central

Pressure washing by drone, with water supplied from the ground.

THE FLIGHT LOG

Four Colorado buildings, as we flew them.

Three finished, one in progress. Every number here is one we published ourselves: the height we flew, the years of buildup we took off, the days it took.

Venue: Empower Field at Mile HighAreas cleaned: windows and building facade

By the numbers

Max Height
90 ft.
Ahead of Schedule
48 hrs.
Dirt Buildup
10 yrs.

The stadium had not had a detailed exterior cleaning in more than a decade. Exhaust soot sat on glass curtain walls and angled metal facades that rise over 90 feet.

We cleaned the sooted metal sills and the glass in the same passes, reclaimed the dirty runoff to Denver's city requirements, and finished two days ahead of schedule.

From our case study

Client: Denver Performing Arts ComplexVenue: Buell TheatreAreas cleaned: glass facade and decorative metal beams

By the numbers

Reach Capability
70 ft
Applied Weight
55 lb or less
Dirt Buildup
20 yrs.

The complex sits under a skylight beside busy roads, so decades of exhaust soot had settled on the glass and the white decorative beams, and the birds had added their share.

The ground was the real problem: delicate stone walkways with a snow-melt system just beneath the surface. A boom lift or a crane could crush the heating elements and crack the stone, so heavy machinery had to stay off the walkways.

From our case study

Client: UCHealthVenue: Memorial Hospital CentralAreas cleaned: windows

By the numbers

Operation Height
80 ft
Dirt Buildup
5+ yrs.
Project Time
2 Days

Key sections of the exterior had gone more than five years without a cleaning. Those sections had no roof anchors, so rope drops were impossible there, and a safety net about eight feet around the roofline kept any crew away from the edge. The most demanding glass sat directly beneath the LifeLine helicopter team's active helipad.

We kept constant radio contact with the LifeLine team, monitored live air traffic through the whole operation, and worked to a formal safety plan for any inbound helicopter.

From our case study

Case study in progress

The old airport tower at Stapleton, now FlyteCo Tower, was our job in March 2024, and the one the press came out to watch. Denverite watched the aircraft work at 164 feet. Our own case study is still in progress.

BusinessDen, Denverite, DroneXL, FOX31 Denver and DroneLife reported on this job in 2024.

Your building is next in the log. Request a quote

WHAT WE CLEAN

What we clean, and how.

The METHOD line under each service is how we do it: water, heat, pressure and, where the stain calls for it, FoamStream.

Seen from inside through tall white-framed windows, a drone outside sprays the glass against a blue sky.

Window Cleaning

Commercial window cleaning by drone, rope access or lift, with a method chosen for your building.

METHODDrone, rope access, lifts and water-fed poles

A yellow cleaning drone fans white foam over a bronze-framed facade with iron balconettes.

Building Cleaning

Facade soft washing at low pressure, or up to 4,000 psi on masonry and concrete, for complex commercial exteriors.

METHODSoft wash at low pressure, or high pressure up to 4,000 psi on masonry and concrete

METHOD

Non-abrasive and contactless; purified water

Solar Panel Cleaning

Non-abrasive, contactless cleaning with purified water to restore panel performance.

A tethered cleaning drone sprays a blue standing-seam metal roof, with its shadow visible on the panels below.

Roof Cleaning

Low-pressure soft washing for metal, asphalt, rubber, built-up, tile and terracotta roofs.

METHODLow-pressure soft wash

A tethered drone sprays a glass facade beneath a cloudy sky, with water running down the windows.

Construction Clean Up

Construction dust, residue and buildup off a newly finished exterior, with drones on the facade and our ground crews on the rest.

METHODDrone plus our ground crews: water-fed poles, lifts, pressure washing

METHOD

Hands-on glass restoration first; drone cleaning for ongoing maintenance

Window Restoration

Heavily soiled glass, mineral scale and graffiti, restored before the drone takes over the maintenance.

Hot Water Cleaning

Heated water between 100°F and 220°F with steam-assisted applications, for grease, pollutants and organic buildup that cold water cannot dissolve.

METHODHeated water 100°F to 220°F, steam-assisted

Foam and Spray Applications

Drone chemical spraying and custom applications for commercial and industrial structures.

METHODCustom foam and liquid spray applications for commercial and industrial structures

See every service

THE PRE-FLIGHT

Planned like a mission.

Every site gets its own plan.

How a mission runs

  1. PRE-FLIGHT

    Assess the site

    Before the first flight we assess the site, set a safety perimeter and stage the water filtration.

  2. LIFT-OFF

    Water from the ground

    A tethered hose carries water and cleaning solution from our rig on the ground up to the drone, which sprays the glass from about ten feet away.

  3. THE RINSE

    Work the glass

    The aircraft works the glass in precise patterns and finishes with a rinse of purified water that dries spot-free.

Where a lift cannot go

The stone walkways

At the arts complex, delicate stone walkways hide a snow-melt system just beneath the surface. A boom lift or a crane risked crushing the heating elements and cracking the stone, so we worked from the air and kept heavy machinery off the walkways.

Denver Performing Arts Complex

No roof anchors, a helipad above

At the hospital, key sections had no roof anchors, so rope drops were impossible there, and a safety net about eight feet around the roofline kept any crew away from the edge. The hardest glass sat beneath an active medevac helipad.

UCHealth Memorial Hospital Central

Our standard procedures, by name.

Aviation & Airspace Management

  • FAA Communication & Clearance
  • Restricted Airspace Approval
  • Pre-Mission Diagnostic Flights
  • Manufacturer Usage Compliance
  • Regular Drone Maintenance

On-Site Control & Signage

  • Safety Zone PerimeterActive work areas are marked with caution tape, construction cones, and physical barricades.
  • MUTCD Standard Signage
  • Traffic Control Plans (TCP)
  • Permit Management
  • Site-Specific Safety Plans (SSSP)

Crew Training & Equipment

  • Visual Observer (VO) TeamsTrained observers assist the pilot to maintain 360-degree situational awareness.
  • Dedicated Safety Coordinators
  • Full PPE Compliance
  • Mobile Safety Trailers
    • Eye wash stations.
    • Comprehensive first aid kits.
    • Fire extinguishers and fire blankets.
  • Emergency Response Training
  • Weather Intelligence
  • Shared Cleaning PlansDetailed mission plans are shared with the client prior to launch for total transparency.

The pilot

The FAA certificates the remote pilot, not the company, and we treat that certificate as the floor, not the ceiling.

The FAA Part 107 certificate is the bare minimum to fly a drone. It's like saying someone has a driver's license and assuming they can operate a semi-truck.

Jay Hanna, Co-Founder and CEO

No drone-specific OSHA standard, yet

OSHA has not written a standard specific to drone cleaning yet. Its General Duty Clause still binds us: a place of employment free from recognized hazards. OSHA covers the ground; the FAA covers the air.

Seen from above, our cleaning drone sprays a hospital facade beside a construction zone; orange cones, caution tape and an observer in a safety vest mark the ground below.
A hospital drive, coned and taped off: our observer below, the aircraft on the upper wall.

Leadership

  • Jay HannaCo-Founder, CEO
  • Nicole HannaCo-Founder

Our company was designed from the ground up around drone cleaning.

Jay Hanna, Co-Founder

Drones do the height. For the rest we bring proven ground equipment: water-fed poles, lifts and traditional access when a job calls for them.

Ask for the safety plan with your quote. Request a quote

THE RIG

Heated water, purified water, and FoamStream.

Our tools are water pressure, chemistry, filtration and heat, and the technique that puts them together. Here is what is in the tank and what comes out of the nozzle.

A yellow cleaning drone sprays a concrete pier beside windows reflecting mountains, with wet streaks across the facade.
Washing in progress: a jet on the concrete beside the glass.

FoamStream™

Clings longer.Cleans deeper.Rinses spotless.

FoamStream™ is our own cleaning system, "a fully engineered application system, inspired by industrial automatic car wash technology." Like a car wash it works on chemistry, dwell time, pressure and rinse: the foam sprays beneath the surface contamination and clings while it works, so the rinse carries the grime off.

A yellow drone sprays a broad sheet of white foam down a vertical band of exterior windows.

Heated water, 100°F to 220°F

Our industrial heaters deliver water between 100°F and 220°F, with steam-assisted applications for large and complex structures. On the hottest settings you can see the steam.

Purified water

We rinse with ultra-purified RO/DI water, deionized or reverse-osmosis, so nothing is left on the glass to dry into spots or mineral buildup.

Pressure, in our figures

900-1500 PSI

Window systems run around 900-1500 PSI at the nozzle, sprayed from approximately ten feet away; the pressure that reaches the glass is significantly lower, comparable to an automatic car wash.

4,000 psi

High-pressure washing, up to 4,000 psi, for masonry, concrete and industrial surfaces.

We choose the aircraft for the building, the height and the site conditions.

Ask what we would put on your glass. Request a quote

LOCATIONS

Colorado, city by city.

From our office in Denver we fly the Front Range, from Fort Collins to Colorado Springs, and up into the mountain towns. Find your city below and request service, and a project manager will tell you what we can do there.

Home base City

Jump to the map

OFFICE

Come see us in Denver.

Our office is at 1635 W 13th Ave, Denver, CO 80204. Call ahead and come by, and a project manager will walk you through how we plan and fly a job.

Request service in Denver Get directions, opens in a new tab

A still of the map's opening view over Colorado, with a pin at each city in view and our office in Denver.

Esri, HERE, Garmin, © OpenStreetMap contributors, GIS user community

Map preview: the opening view over Colorado. The list carries every city.

Click the map, then scroll to zoom; arrow keys pan it once it has focus. Pinch or use the plus and minus buttons to zoom; one finger scrolls the page.

Not on the list? Call us anyway. +1 (866) 838-1555 Find your market

QUESTIONS

Straight answers, before you call.

How does drone window cleaning work?

A tethered hose carries water and cleaning solution from our rig on the ground up to the drone, which sprays the glass from about ten feet away. Before the first flight we assess the site, set a safety perimeter and stage the water filtration; then the aircraft lifts off, works the glass in precise patterns and finishes with a rinse of purified water that dries spot-free.

How high can you clean?

We like to stay below 150 feet. Over 150 feet, wind shear and stability at altitude call for additional planning, and the hose setup limits how high a drone can clean efficiently. The highest job we have published is 90 feet. A taller building is a conversation with a project manager.

Is drone window cleaning safe for the glass and for the people below?

Our window systems run around 900 to 1,500 PSI at the nozzle, sprayed from approximately ten feet away; the pressure that actually reaches the glass is significantly lower and comparable to an automatic car wash. Below the aircraft we mark a safety zone perimeter with caution tape, cones and barricades, put MUTCD standard signage on any sidewalk or street we work near, and station visual observers with the pilot.

Do you need roof access, and will you disrupt my tenants?

In most cases roof access is not required. We fly from the ground, which keeps disruption to tenants and building operations to a minimum, and we review the site in advance to settle staging and access.

What happens in wind, cold or sun?

Wind decides the day. Sustained wind of 0 to 10 mph is ideal; 10 to 15 mph is case by case with a limited scope; 15 mph or more, or gusty, is a no-fly, and we build at least one buffer day into the schedule. We never work in direct sunlight, because chemistry drying on glass must be avoided. In winter we work above about 42 degrees Fahrenheit with heated purified water, and we postpone when freezing makes cleaning unsafe or ineffective.

Do you use chemicals, and where does the runoff go?

When a surface needs it, yes: surface-appropriate chemistry with purified water, chosen for the dirt, the material and the conditions. Whenever possible we clean with purified water only, which is how we keep the environmental impact down. On tough stains our FoamStream system clings longer and rinses spotless. Where city or state rules require it, we reclaim and dispose of the wastewater.

What if the windows have not been cleaned in years?

Heavy mineral staining or long-term neglect is beyond a maintenance wash: drone cleaning alone will not fully restore that glass. We recommend restoration first, by rope access or traditional methods, and once the glass is restored the drone comes back to keep it clean. At the hospital in Colorado Springs, five years of sun-baked scale took a slower restoration clean with hot water and more pressure, and the glass came out spotless.

Still a question? Ask it in the form.

REQUEST A QUOTE

Tell us about the building.

Send your building details. A project manager will follow up with questions, then a plan.

Enter your first name.

Enter your last name.

Enter an email address, like name@company.com.

Enter a 10-digit phone number.

Choose the building's state.

Enter the building's address.

Choose what needs cleaning.

Height, access, deadlines, anything a project manager should know before calling.

Or reach us directly+1 (866) 838-1555info@trydronewash.com

Call 866-838-1555 Request a quote
Request a quote +1 (866) 838-1555

PRE-FLIGHT · QUOTE REQUEST

Tell us about the building.

Enter your first name.

Enter your last name.

Enter an email address, like name@company.com.

Enter a 10-digit phone number.

Choose the building's state.

Enter the building's address.

Choose what needs cleaning.

Height, access, deadlines, anything a project manager should know before calling.

Ask a question

CONTACT DRONEWASH+

How can we help?

Send a question to the team. Replies come by email.

Prefer to call? +1 (866) 838-1555